There are many different ways to find the right place to put your engraving. One of the simplest methods is to cut a square, with a few markers. Using this square you can place your object to be engraved, overlay it with the template in the position you are about to engrave, and then use the engraver preview function to align the preview laser with the square template. This article shows one of the most simple templates. It's also a good exercise for practising alignment, one of the keys to a perfect result. Firstly, create an 80mm x 80mm square, with 0.2 point lines marking out 1,2,3,4 and 5mm in from the edge. This is printed out onto the card or other material that you will use as your template. You can download the image here . The next step is to cut a hole by following the 5mm line. This will remove the central 70mm of the template (80mm minus 5mm from each edge). Put the printed card under the engraver, and tape it down if it is raised from the surface underneath. Remember ...