Carving and Cutting - what's the difference?

There are two ways of engraving in the apps. You will find settings for carving and for cutting. This is a screenshot from the Android app:

Carving Depth

You can think of the carving mode as a printer. It takes an image and it "prints" it to the material, moving left to right, top to bottom. The strength dictates how deep the engraving is etched into the material. Carving applies to the following Picture Processing modes:

Black and White (Panda 1)
Grayscale (Panda 2)
Sketch (Panda 4)

Cutting Depth

This setting applies to two engraving actions:

Picture Processing mode Cutting (Panda 3)
Shapes

When in cutting mode, or when engraving shapes, the engraver head will follow the contour of the image. The laser will not try to replicate the width of a line or fill a coloured area, it will draw the finest line possible around the contour.

Depending on your Picture Processing mode and content of your image, you will only need to set the related settings. For example, when in sketch mode there is no reference to the cutting setting.

Comments

Computer software versions - Windows & Mac

There are numerous versions of the software as it evolves. The package is developed in Java and so requires the installation of the Java virtual machine. As I already have this, I can't comment on whether it will automatically install if it is absent. The versions are listed below with the most recent first. December 29 2020 The latest downloads are found in the link below. At the time of writing, these are extremely slow, and can take 2-3 hours to download. Make sure you select the downloads for "K6" and the operating system you are working with. There is a mirror of the field here on a Google drive. It is the same files, but download many times faster than the Wainlux-provided site. Google Drive mirror Wainlux download site November 15 2020 *** As of December 29 2020, THESE LINKS ARE NOW GONE *** The following software and firmware versions are tested by several owners and working. This is version 1.1.2 There are 2 identified issues: The maximum engraving area is 80mm w...

Alignment Template II

In a previous post I uploaded my Simple Positioning Template to align objects with the position of the laser. Although useful in my early tests and trials, I came to realise this is - in most cases - the wrong way around. I have found that it is better to create a template that sits on top of the object to be engraved. Here you can see my latest template in action. By using the preview function in the app, I can quickly align the engraving area to the template. Another little tip here is to reduce the power of the weak light to 3 or 4. you get a less intense beam that is easier to view and align. As you can see, the template has plenty of holes to view the surface below. The lines of the cutouts also help to align areas smaller than the full square. The image for the template is linked below. You can create your own from this image, I would recommend using card to create it. On a darker card like that shown in the photo, you can use cut mode (Panda 3 in the interface...

Wainlux K6 User Information

Search This Blog