Skip to main content

Simple Positioning Template

The link below will take you to a PDF download. This template is designed to help you position your K6 Engraver and objects accurately. Simply place the object in the engraving square, using the various markers to assist. Then place the engraver in its marked position.


I am not claiming this to be either elegant or pixel perfect. But it is a good starting point for simplifying the process and getting to the fun bits!

Make sure you print at 100% scale.

Download link - https://drive.google.com/file/d/1xdVlMJC9TGClP5KqZOtkLowLXnyBYQ-H/view?usp=sharing

Second version - bolder lines, clearer engraving square (more ink!) - https://drive.google.com/file/d/1_hoZAzjFVuzRH5InXvLB_EL6NnK95s-c/view?usp=sharing


By Labels:

Comments

Post a Comment

Popular posts from this blog

Computer software versions - Windows & Mac

By
There are numerous versions of the software as it evolves. The package is developed in Java and so requires the installation of the Java virtual machine. As I already have this, I can't comment on whether it will automatically install if it is absent. The versions are listed below with the most recent first. December 29 2020 The latest downloads are found in the link below. At the time of writing, these are extremely slow, and can take 2-3 hours to download. Make sure you select the downloads for "K6" and the operating system you are working with. There is a mirror of the field here on a Google drive. It is the same files, but download many times faster than the Wainlux-provided site. Google Drive mirror Wainlux download site November 15 2020 *** As of December 29 2020, THESE LINKS ARE NOW GONE *** The following software and firmware versions are tested by several owners and working. This is version 1.1.2 There are 2 identified issues: The maximum engraving area is 80mm w...
4 comments
Read more

Cutting quality and times

By
Cutting mode on the Wainlux K6 engraver is much faster than the other engraving modes. This is because rather than scanning back and forth like a traditional printer, it follows the contours of the image. The test piece below is a good example that shows even complex contours - with lines inside lines - are possible in Cutting mode. Cutting mode is not just for cutting. With the right settings, it can be used to trace an image in wood or other materials. The obvious limitation is that you can't fill areas. With a little forward planning, it is possible to combine faster engraving of lines with slower engraving of more detailed areas. The equivalent image in Black or Greyscale mode takes around 45 minutes.  Using the logo from my daughter's business, I ran some tests for the cutting options. In all cases the engraving size is 70mm in diameter. Any settings that are not mentioned are left at their defaults. You will not see much difference in the photos, but please read the desc...
2 comments
Read more

Alignment Template II

By
 In a previous post I uploaded my Simple Positioning Template to align objects with the position of the laser. Although useful in my early tests and trials, I came to realise this is - in most cases - the wrong way around. I have found that it is better to create a template that sits on top of the object to be engraved. Here you can see my latest template in action. By using the preview function in the app, I can quickly align the engraving area to the template. Another little tip here is to reduce the power of the  weak light  to 3 or 4. you get a less intense beam that is easier to view and align. As you can see, the template has plenty of holes to view the surface below. The lines of the cutouts also help to align areas smaller than the full square. The image for the template is linked below. You can create your own from this image, I would recommend using card to create it. On a darker card like that shown in the photo, you can use cut mode (Panda 3 in the interface...
5 comments
Read more