Skip to main content

An Official Welcome to the Unofficial K6 Engraver Blog

 Welcome to this unofficial blog on how to get the most from your Wainlux K6 Engraver. It's less of a blog, and more of an organic instruction manual, curating what we know in one place.

At the time of starting this blog, the Kickstarter early adopters are starting to receive their machines and working through that interesting time of a Kickstarter project, where things aren't always perfect!

This is a living blog where the information will change over time. Make sure you take note of software and app versions, and platforms for software.

Good luck, enjoy the journey and not just the destination!


By Labels:
Location: Keighley, UK

Comments

  1. mxbag1990December 28, 2020 at 5:52 PM

    Hi-just receive my K6 yesterday. Installed the Mac Software and driver on MacBook Air running Mojave (OSX 10.14). I did the install 1 and install 2 and was prompted to download install 3 and install that.

    I was not able to connect to the K6. When I click on the "connect" icon-nothing. I then tried it on an older Mac Pro running High Sierra-nothing. Then tried other USB cords-still nothing. Has anyone had this experience and, more important, has anyone found a work-around for this?

    ReplyDelete
  2. MarkeMarch 21, 2021 at 1:55 AM

    You're probably using the wrong software version.
    I found that the older version is way better

    ReplyDelete
  3. DorairFebruary 14, 2022 at 5:25 AM

    Hola In my case I occupy to see if it has the original calibration template in mine did not come and is printing half of the design.

    ReplyDelete

Post a Comment

Popular posts from this blog

Computer software versions - Windows & Mac

By
There are numerous versions of the software as it evolves. The package is developed in Java and so requires the installation of the Java virtual machine. As I already have this, I can't comment on whether it will automatically install if it is absent. The versions are listed below with the most recent first. December 29 2020 The latest downloads are found in the link below. At the time of writing, these are extremely slow, and can take 2-3 hours to download. Make sure you select the downloads for "K6" and the operating system you are working with. There is a mirror of the field here on a Google drive. It is the same files, but download many times faster than the Wainlux-provided site. Google Drive mirror Wainlux download site November 15 2020 *** As of December 29 2020, THESE LINKS ARE NOW GONE *** The following software and firmware versions are tested by several owners and working. This is version 1.1.2 There are 2 identified issues: The maximum engraving area is 80mm w...
4 comments
Read more

Carving and Cutting - what's the difference?

By
 There are two ways of engraving in the apps. You will find settings for carving and for cutting. This is a screenshot from the Android app: Carving Depth You can think of the carving mode as a printer. It takes an image and it "prints" it to the material, moving left to right, top to bottom. The strength dictates how deep the engraving is etched into the material. Carving applies to the following Picture Processing modes: Black and White (Panda 1) Grayscale (Panda 2) Sketch (Panda 4) Cutting Depth This setting applies to two engraving actions: Picture Processing mode Cutting (Panda 3) Shapes When in cutting mode, or when engraving shapes, the engraver head will follow the contour of the image. The laser will not try to replicate the width of a line or fill a coloured area, it will draw the finest line possible around the contour. Depending on your Picture Processing mode and content of your image, you will only need to set the related settings. For example, when in sketch mo...
Post a Comment
Read more

Cutting quality and times

By
Cutting mode on the Wainlux K6 engraver is much faster than the other engraving modes. This is because rather than scanning back and forth like a traditional printer, it follows the contours of the image. The test piece below is a good example that shows even complex contours - with lines inside lines - are possible in Cutting mode. Cutting mode is not just for cutting. With the right settings, it can be used to trace an image in wood or other materials. The obvious limitation is that you can't fill areas. With a little forward planning, it is possible to combine faster engraving of lines with slower engraving of more detailed areas. The equivalent image in Black or Greyscale mode takes around 45 minutes.  Using the logo from my daughter's business, I ran some tests for the cutting options. In all cases the engraving size is 70mm in diameter. Any settings that are not mentioned are left at their defaults. You will not see much difference in the photos, but please read the desc...
2 comments
Read more